Solar cable red 100m 6mm

The solar cable SOLS6100 (100 metres, 6mm²) in black is the professional solution for photovoltaic installations where maximum efficiency and minimal resistance are paramount. With a length of 100 metres on a reel and a reinforced cross-section of 6mm², this cable is excellent for large roof systems, open-area projects or systems with high currents. The black identification enables standard-compliant identification of the negative pole (-) and ensures clearly arranged cabling.Certified in accordance with the international standard IEC 62930, this cable offers maximum safety for modern PV systems with voltages of up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section significantly reduces the electrical resistance and provides more yield compared to standard cables.Certified safety: Complies with IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.Long range: 100 metres in one piece enable custom cuts for tailor-made string connections without unnecessary separation points.Extremely resistant: The high-quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a lifespan of more than 25 years.Corrosion-protected conductor: Fine-stranded, tinned copper offers permanently optimum conductivity and protects against oxidation in a damp environment.Wide temperature range: Safe operation in extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLS6100 is the number one choice for demanding PV projects:Large roof systems & PV parksEfficient string cabling and connection of distant module fields to the central inverter.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to ensure the loss-free transport of high currents.Battery storage & stand-alone systemsPerfect for 24V or 48V systems where low voltage drops are crucial for charging efficiency.Assembly & safety instructionsProfessional connectionsFor this cross-section, use only MC4 connectors that are explicitly approved for 6mm² cable, and use high-quality crimping pliers.Mechanical protectionWhen laying on the roof or through walls, use corrugated ducts or cable ducts to protect the insulation from mechanical abrasion and rodent bites.Parallel cable routingRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields (induction loops). Features Model / SKU**SOLS6100** Conductor cross-section**6.0 mm²** Delivery form**100 metre reel** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV- & ozone-resistant  FAQs about solar cable black 100m 6mm²Why should I choose 6mm² instead of 4mm²?For more yield and future-proofing.Especially for cable lengths above 15–20 metres or when using modules with high current (Isc above 13A), voltage drop is noticeably lower with 6mm². This means more energy reaches the inverter and the cable stays cooler under high load.Can the cable be laid directly in the ground?Only in protective conduit.Although the insulation is very robust, the cable is not designed for direct burial without protection. Installation in a suitable cable conduit in the ground, however, is no problem.Is the cable resistant to chemicals?Yes.The XLPO insulation is resistant to acids, alkalis and ammonia. This makes it particularly suitable for agricultural (stables) or industrially impacted areas.

The Deye SUN-50K-SG01HP3-EU-BM4 is a high-performance hybrid inverter for commercial solar installations with high energy requirements. With a rated output of 50 kW, four MPPT inputs and support for high-voltage batteries, it offers maximum efficiency, flexibility and safety, making it ideal for large PV projects, industrial applications and off-grid power supply systems.Highlights at a glanceHigh-performance: 50 kW rated power and 55 kW maximum output power Four MPPT inputs with 8 strings for optimum energy yield Parallel connection of up to 10 devices possible 100% unbalanced output Can be used per phase Two high-voltage battery inputs (up to 800 V) with 2× 50 A charging/discharging currentEfficient energy conversion for large-scale installationsWith a maximum DC input power of 65,000 W, four MPPT trackers and an efficiency of up to 97.6 %, the Deye SUN-50K-SG01HP3-EU-BM4 is ideal for large-scale photovoltaic systems. The MPPT efficiency of 99.9 % ensures optimum power output even in the event of partial shading or heterogeneous module arrays.Flexibility and scalabilityThis inverter can be used in systems with up to 10 units connected in parallel, making it particularly suitable for large-scale modular projects. Thanks to two battery inputs with high-voltage support (160–800 V) and a charge/discharge current of 50 A each, it can be flexibly combined with high-performance storage systems. The six programmable charge/discharge time slots provide intelligent energy management for self-consumption and grid offloading.Reliability and protectionWith an IP65 protection rating and comprehensive safety features such as reverse polarity protection, residual current monitoring and overvoltage protection (DC Type II / AC Type III), the inverter is ideally equipped for demanding operating conditions. The intelligent cooling system ensures quiet operation (< 65 dB) even at high power output.Who is the Deye SUN-50K-SG01HP3-EU-BM4 suitable for?This inverter is ideal for: Commercial enterprises and industrial facilities with very high energy consumption Large-scale projects with multiple battery storage systems and module arrays Installers who wish to implement future-proof high-voltage systems Off-grid installations with a diesel generator connection Grid-parallel storage solutions with intelligent load management FAQs on the Deye Sun 50K Hybrid inverterDo I need external overcurrent protection for systems rated at 50 kW or above?No. The inverter has an integrated anti-islanding circuit and complies with all relevant standards such as VDE-AR-N 4105, EN 50549 and G99. Additional NA protection is therefore not required.Which high-voltage storage units are approved?Officially compatible models include, among others, the BYD HVS/HVM, Pylontech Force H1/H2, Dyness Tower and the Deye GB-L series. Communication takes place via CAN or RS485, depending on the model. The correct setup number is entered directly in the ‘Battery → Lithium → Setup Number’ menu or set via DIP switches. According to the supplier, other storage solutions such as BOS-G are already pre-configured. It is recommended that you check the model against the compatibility list, as changes to the protocols can occur from time to time.How many kWp can I connect without clipping?According to the data sheet, the maximum DC input power is 65,000 W. In practice, a generator size of 60 to 65 kWp is considered optimal. Only above this limit may minor clipping losses occur on a few days of high load, which remain below two per cent over the course of a year. However, it is recommended to remain below 65 kW. The starting voltage of the solar modules is the decisive factor here. Can I connect several 50-kW units in parallel?Yes. Up to ten inverters may be operated in parallel, both grid-connected and off-grid. One unit acts as the master, including the CT sensor connection, whilst the remaining units automatically follow as part of the array.Do I need special ventilation?Active air conditioning is not required. The inverter operates with intelligent air cooling and is designed for ambient temperatures of up to 60 °C. The maximum noise level is 65 dB(A) under full load; in standby mode, the unit remains virtually silent. Good air circulation is essential, for example in a ventilated plant room or at a sheltered outdoor location. The fan inlets and outlets must remain unobstructed; otherwise, charging problems may occur.  Scope of delivery: Deye SUN-50K-SG01HP3-EU-BM4 (50 kW HV hybrid inverter) 1 x Deye SUN-50K-SG01HP3-EU-BM4 inverterAn extremely powerful three-phase high-voltage hybrid inverter with a 50 kW output, an integrated LCD touchscreen and four MPPT trackers for large commercial photovoltaic systems.1 x wall mount bracketA reinforced metal mounting rail for securely fixing the heavy industrial equipment to a load-bearing wall or mounting frame.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet, enabling remote monitoring via the Deye cloud or the Solarman app.3 x current transformers (CT)External clamp-on current transformers for measuring energy flows at the property connection point, necessary for zero-feed-in and optimising self-consumption during periods of high load currents.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the numerous PV strings to the MPPT inputs of the inverter.1 x set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible high-voltage battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x fitting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the solid wall bracket.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

The Deye BOS-G 60 PRO high-voltage storage set is a reliable and high-performance storage solution for commercial applications and demanding domestic households. With a total capacity of 61.44 kWh, modular expandability and intelligent battery management, it meets the highest standards of safety, efficiency and flexibility.Highlights at a glanceHigh capacity: 61.44 kWh gross storage capacity for large energy systemsUsable energy: 55.30 kWh at 90 per cent depth of dischargeFlexible scalability: Up to 16 battery racks can be operated in parallelIntelligent control: Integrated BMS protects against overcharging, deep discharge and overheatingEasy to use: Quick installation in a 19-inch rack formatEfficient energy storage for modern projectsWith its high voltage of 614.4 V and a wide operating voltage range of 528 to 700.8 V, the BOS-G 60 PRO provides an excellent basis for integration into existing energy systems. The lithium iron phosphate technology used ensures a high level of safety, low self-discharge and a long service life.Modular and customisableThe system architecture allows for flexible expansion to up to 16 parallel battery racks and the parallel AC operation of up to 10 Deye inverters. This enables the system to be precisely adapted to increasing requirements and ensures it remains scalable in the long term.Safe power managementThe integrated BMS continuously monitors cell voltages, temperatures and state of charge. It actively protects against critical operating conditions and optimises the service life of the battery units through automatic cell balancing.Who is the Deye BOS-G 60 PRO suitable for?The high-voltage storage set is ideal for:Commercial premises with high energy consumption or emergency power requirementsLarge-scale photovoltaic systems with a focus on optimising self-consumptionPrivate households with above-average energy consumptionProject developers who require a modular, certified high-voltage systemFAQs on the Deye BOS-G 60 PRO high-voltage storage setWhat is the storage capacity of the BOS‑G 60 PRO and how much of this is usable?The set consists of 12 LiFePO4 modules, each with a gross capacity of 5.12 kWh, giving a total storage capacity of 61.44 kWh. Thanks to the recommended 90% depth of discharge (DoD), around 55.3 kWh of usable energy is available, making it ideal for large private households or commercial applications.What protection and management functions does the BMS perform?The integrated battery management system (BMS) continuously monitors and protects against overvoltage, undervoltage, overcurrent, short circuits and temperature deviations. It also actively balances all cells and ensures optimum charging and discharging conditions.What electrical parameters (voltage & current) are relevant?Operating voltage: between 528 V and 700.8 V, rated voltage at 614.4 V DCMaximum continuous current: 100 AShort-term peak current: 125 A (approx. 2 minutes)Is the system modularly expandable?Yes, the modular design allows several BOS‑G 60 PRO storage units to be operated in parallel. Up to 16 tanks (racks) can be connected in series and up to 10 inverters in an AC network, enabling capacity and redundancy to be scaled as required.Within what temperature range can the storage unit be operated?Discharge: from −20 °C to +55 °CStorage: from 0 °C to +55 °C. Scope of delivery Deye BOS-G60 PRO high-voltage storage set (61.44 kWh) with rack system: System configurationThis product is a set comprising a rack cabinet and the 13 individual plug-in modules (1x BMS and 12x batteries).Component 1: Deye Rack system / Battery cabinetA cabinet designed to house the BMS unit and the battery modules, often fitted with castors and feet.Component 2: ‘ Deye ’ control box / BMS plug-in moduleThe central control unit (BMS/BCCB), which is inserted into the rack cabinet as a module.Components 3 to 14: Twelve Deye BOS-G-PRO-Pack5.1 high-voltage battery modules (5.12 kWh each)Twelve pure high-voltage battery modules, which are also inserted into the rack cabinet.1 set of battery connection cables (positive & negative)A pair of special high-voltage power cables for connecting the BMS module to a compatible high-voltage hybrid inverter.1 x communication cable (CAN/RS485)A long data cable for communication between the BMS module and the inverter.12 x connecting bridges / series connection cablesShort, robust cables or fixed jumpers to connect the thirteen plug-in modules (BMS + 12 batteries) to one another within the rack.1 x earth cableA protective earth cable for the correct earthing of the rack system.1 x set of mounting accessories (rack mounting)Includes screws and rails for securing the modules within the rack, as well as materials for anchoring the cabinet to the floor.1 x User and Installation GuideA printed manual describing how to assemble the complete rack system.

The Deye SE-G5.1Pro-B is a high-performance battery module with a storage capacity of 5.12 kWh, based on safe lithium iron phosphate (LiFePO4) technology. With its modular design, support for high-current applications and flexibility in installation, it is the ideal solution for modern energy storage systems in both domestic and commercial settings.Key features at a glanceSafe & durable: Cobalt-free LiFePO4 cells with intelligent BMS Modular and scalable: Up to 64 modules – max. 327 kWh storage capacity High compatibility: Suitable for wall mounting, floor mounting and 19" racks Easy maintenance: Automatic networking, remote monitoring & USB firmware updates Reliable operation: IP20, natural cooling, wide temperature range down to -20 °CCompact, scalable & intelligently networkedWith an individual capacity of 5.12 kWh, the Deye SE-G5.1Pro-B is ideal for smaller storage solutions or as a building block in large-scale modular storage systems. Thanks to the ability to connect up to 64 units in parallel, a maximum total capacity of 327 kWh is achievable. Perfect for applications with growing energy requirements. Automatic network addressing and support for firmware updates via USB or remote access make commissioning and maintenance considerably easier.Flexible mounting options – space-saving & easy to installThanks to three mounting options – rack mounting (19-inch), wall mounting or floor installation – the module can be positioned optimally in almost any environment. With its compact design, measuring just 133 mm in height, it saves valuable space in technical rooms or living areas.Who is the Deye SE-G5.1Pro-B suitable for?Private households looking for a safe and future-proof storage system Commercial enterprises requiring scalable storage solutions for self-consumption or backup System integrators and installers who prioritise easy integration and low maintenance Sustainability-minded users who rely on environmentally friendly storage technologyFAQs on the Deye SE-G5.1Pro-B battery storage systemHow much energy is actually usable?One module provides a gross capacity of 5.12 kWh, of which approximately 4.6 kWh is usable at a 90% depth of discharge; it is particularly suitable for domestic and commercial applications.What are the applicable voltages and currents per module?The module operates at a nominal voltage of 51.2 V and has a capacity of 100 Ah. The continuous current is 50 A, with a peak current of up to 150 A possible for 10 seconds.How many modules can be combined?In the IP20 version, up to 64 modules can be connected in parallel, corresponding to a total capacity of over 327 kWh. Common in domestic applications: six modules per tower, i.e. 30.7 kWh per unit.How long does the module last?The cells achieve over 6,000 cycles at 90% DoD, with a residual capacity of at least 70% at end of life, meaning they are designed for long-term use.Which ‘ Deye ’ inverters is the system compatible with?The battery is officially approved for all three-phase hybrid inverters in the SUN-xK-HP3 and SUN-xK-BM series, and is fully plug-and-play compatible without the need for any additional adjustments. We strongly recommend checking the compatibility list, as the manufacturer may make changes. Contents of the Deye SE-G5.1Pro-B rack battery module (5.12 kWh): Module typeThis is a a single, flexible low-voltage battery module for installation in 19-inch racks, wall mounting or floor-standing.1 x Deye SE-G5.1Pro-B battery module (5.12 kWh)The central storage unit with 5.12 kWh (100 Ah) in rack format, including a smart, integrated battery management system (BMS).1 x set of mounting handles / rack earsHandles for easier handling and for securing the module in a 19-inch server rack.1 set of battery connection cables (positive & negative)A pair of pre-assembled high-performance cables for connecting the module (or battery stack) to a compatible hybrid inverter.1 x communication cable (CAN/RS485)A data cable for communication between the battery module and the inverter.1 x parallel connection cable (power & communication)Short cables to connect this module’s power and data bus to another module.1 x earth cableA protective earth cable for the correct earthing of the housing.1 x User and Installation GuideA printed manual describing the various installation types (rack, wall, stacking).2 x wall bracketsFor wall mounting the battery pack 4 x feetFor stacking and securing the battery

The Deye SUN-12K-SG02LP1-EU is a high-performance hybrid inverter for modern photovoltaic systems. With up to 12 kW AC power, flexible battery connection and comprehensive protection functions, it offers a reliable solution for grid-connected and off-grid applications in both domestic and commercial settings.Highlights at a glanceHigh performance: 12 kW AC output power for demanding energy systemsFlexible operation: Up to 16 units can be operated in parallel – on-grid and off-gridVersatile storage integration: Supports lithium-ion and lead-acid batteriesSmart energy management: 6 freely configurable time slots for charging and dischargingMaximum safety: Integrated protection against overload, short circuit, overvoltage and island operationEfficient energy use with hybrid technologyThe SUN-12K-SG02LP1-EU supports both DC and AC coupling, making it ideal for both new installations and retrofits. With a maximum efficiency of 97.6% and an MPPT efficiency of 99.9%, it ensures optimum energy conversion.Flexibility through parallel connectionUp to 16 inverters can be operated in parallel, both in grid-connected and off-grid mode. This allows projects of any scale to be implemented, from private homes with high energy requirements right through to larger commercial installations.Smart battery usageWith a maximum charging and discharging current of 190 A and adaptive communication with the BMS (RS485, CAN), the inverter supports both lithium-ion and lead-acid batteries. The battery can also be charged from a diesel generator, which expands its range of applications.Safety and protective functionsThe Deye SUN-12K-SG02LP1-EU is certified to international standards and offers comprehensive protection mechanisms: overvoltage and short-circuit protection, anti-islanding, residual current monitoring and PV string monitoring. It therefore meets the highest safety standards for stable operation.Who is the Deye SUN-12K-SG02LP1-EU suitable for?This hybrid inverter is ideal for:Private households with a high proportion of self-consumptionCommercial enterprises requiring an uninterrupted power supplyInstallations requiring flexible expandability through parallel connectionOperators of PV systems who wish to use both grid-connected and off-grid operationFAQs on the Deye SUN-12K-SG02LP1-EU hybrid inverterWhich types of battery can be connected to the 12 kW inverter?The inverter is compatible with lithium-ion and lead-acid batteries and automatically adapts its charging strategy to the respective BMS.Can the single-phase inverter be operated in parallel?Yes, up to 16 units can be connected in parallel, for both grid-connected and off-grid systems.What safety features are built in?The device features overvoltage, short-circuit, isolated grid and overcurrent protection, as well as integrated monitoring for PV strings and residual currents.Is the inverter also suitable for retrofitting?Yes, thanks to AC and DC coupling, the SUN-12K-SG02LP1-EU is suitable for both new installations and the expansion of existing PV systems.What is the warranty for the device?Deye A 10-year manufacturer’s warranty is provided. Contents: Deye SUN-12K-SG02LP1-EU 12 kW hybrid inverter, single-phase 1 x Deye SUN-12K-SG02LP1-EU inverterA single-phase hybrid inverter with a 12 kW output, an integrated colour LCD touchscreen and support for 48V low-voltage battery systems.1 x wall mount bracketA sturdy metal mounting rail for securely fixing the unit to a load-bearing wall.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet, enabling remote monitoring via the Deye cloud or the Solarman app.1 x current transformer (CT)An external fold-out current transformer for measuring energy flows at the property connection, necessary for net metering and optimising self-consumption.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the PV strings to the inverter.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x fitting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the correct installation of the wall bracket.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.