Deye SUN-3.6K-SG05LP1-EU-AM2 - 3.6 kW low-voltage hybrid inverter

The Deye SE-F5 Pro-C is a state-of-the-art 5.12 kWh battery storage module based on safe lithium iron phosphate (LiFePO4) technology. As part of the "Pro" series, this 51.2V low-voltage battery has been specially developed for seamless integration with Deye hybrid inverters and other common 48V systems.The storage unit is characterised by its high energy density, the cobalt-free chemistry and the intelligent battery management system (BMS). The SE-F5 Pro-C is the ideal solution for residential and commercial applications requiring reliable optimisation of self-consumption (solar) or a robust emergency power supply. Thanks to its modular design, the capacity can be flexibly expanded from 5 kWh up to the high double-digit kWh range.Highlights at a glanceSafest cell chemistry (LiFePO4): Uses lithium iron phosphate, which is extremely thermally stable, does not burn and is considered the safest lithium technology on the market.High capacity (5.12 kWh): Provides 100 Ah at a nominal voltage of 51.2 V in a compact housing, ideal for long operating times.Long service life (6000+ cycles): Designed for over 6000 charge/discharge cycles (at 25°C, 90% DOD), which corresponds to a service life of well over 10-15 years.Intelligent BMS: The integrated battery management system protects against overcharging, deep discharge, overcurrent and overtemperature, and ensures active cell balancing.Environmentally friendly (cobalt-free): The battery contains absolutely no toxic cobalt, which minimises the environmental impact during both manufacture and disposal.Flexible scalability: Supports the parallel connection of up to 32 units (up to 64 in some cases, depending on the module) to achieve storage capacities of over 160 kWh.Easy installation: Thanks to its standard 19-inch dimensions, the module is perfectly suited for rack systems or wall mounting (with suitable brackets).Deye compatibility: Perfectly matched to Deye hybrid inverters (automatic detection via CAN bus), but also compatible with Victron, Growatt, SMA etc. (depending on protocol).Areas of applicationThe Deye SE-F5 Pro-C is highly versatile:Optimisation of self-consumption: Storage of surplus PV electricity for use at night.Emergency power systems (backup): A reliable power source in the event of a power cut.Peak Shaving: Peak load shedding in commercial premises.Off-grid systems: Stand-alone systems without a grid connection.Technology & BenefitsThe SE-F5 Pro-C stands out thanks to the following technical features:LFP technology: Unlike NMC batteries, LiFePO4 does not tend to experience "thermal runaway" if damaged. This makes installation in the home particularly safe.Smart communication: The BMS actively communicates with the inverter. It reports state of charge (SOC), state of health (SOH) and temperature in real time, enabling the inverter to dynamically adjust the charging curve.Soft start: Integrated pre-charge resistors prevent high inrush currents that could trip fuses when the battery is switched on. Installation & operating instructionsCabling: Standard battery cables (often 25mm² or 35mm²) with Amphenol or M-type screw terminals (check depending on model!) are required for connection to the inverter. The communication cable (RJ45, CAN bus) is essential for the warranty.Addressing: When connected in parallel, the batteries often need to be addressed via DIP switches (master/slave configuration), with the master handling communication with the inverter.Temperature: Lithium batteries should not be charged at temperatures below 0°C. The BMS stops charging in frosty conditions to protect the cells. Ideal operating range: 15°C to 30°C. Features ModelDeye SE-F5 Pro-C (Cobalt Free) Technology**LiFePO4** (lithium iron phosphate) Rated voltage**51.2 V** Rated capacity**100 Ah** Energy content**5.12 kWh** Recommended depth of discharge (DOD)90% (for maximum service life) Cycle life**≥ 6000 cycles** (at 25°C, 0.5C rate) CommunicationCAN 2.0 / RS485 (Perfectly matched to Deye inverters) Dimensions (W x D x H in mm)440 x 530 x 133 (standard **3U** rack height) Weight (kg)approx. **45.0 kg**  FAQs on the Deye SE-F5 Pro-CDoes this battery also work with other inverters?Yes. Deye uses standard protocols (Pylontech protocol, among others). The battery is compatible with many 48V low-voltage inverters, provided the relevant protocol is selected in the BMS or inverter. However, it offers the best performance within the Deye ecosystem. It is strongly recommended that you check the compatibility list beforehand.What is the difference compared to the SE-G5.1 Pro?The designations (Pro, Pro-C, Pro-B) often refer to revisions in the casing design, chip availability or certifications (e.g. UL certificates for specific markets). The core technical specifications (5.12 kWh, LFP) are usually identical. The "C" version is often the current variant, optimised for the European market.Can I expand the battery later?Yes, no problem. You can connect additional modules in parallel at any time to increase capacity. The BMS compensates for differences in charge between new and old modules to a certain extent. However, it is recommended to combine modules with a similar state of ageing or to perform a one-off full balancing of the system. Scope of delivery: Deye SE-F5 Pro-C (5.12 kWh)This product is a set and consists of the inverter unit and the separate battery modules.1 x Deye SE-F5 Pro-C battery moduleThe main unit with 5.12 kWh capacity, integrated battery management system (BMS) and LCD display for status indication.1 x wall bracket (Mounting Bracket)A mounting plate that is fixed to the wall in order to securely hang the battery module.1 x set of battery connection cablesUsually includes a negative battery cable as well as the positive connection plug (or a pair of cables) for connection to the inverter.1 x RJ45 communication cableRequired for the data connection between the battery (PCS port) and the hybrid inverter.1 x grounding cable (Grounding Cable)A yellow-green cable for the proper protective earth connection on the housing.1 x set of mounting materialConsisting of expansion plugs (usually M6x100), screws (M4) and hexagon screws for fixing to the bracket.4 x stacking brackets (Stacking Brackets)Special brackets that are required if several modules are not hung on the wall, but are instead to be stacked on top of each other on the floor.1 x positioning template (Positioning Paperboard)A cardboard template for marking the drill holes for the wall bracket exactly.1 x user manual (User Manual)Technical manual with installation instructions and safety information.

The Deye RW-F10.6 is an integrated low-voltage energy storage system designed for maximum efficiency, safety, and easy installation in modern photovoltaic systems. Based on superior lithium iron phosphate (LiFePO4) technology, this system offers a high usable capacity of 10.64 kWh in a single, enclosed unit. It is optimised for space-saving wall mounting, making it the ideal solution for homeowners and small businesses who want to maximise their self-consumption.Highlights at a glanceHigh storage capacity: Provides a large energy reserve of 10.64 kWh for maximum independence in a single device.Optimised for wall mounting: Designed for space-saving and safe installation on the wall.Maximum safety with LiFePO4: The cobalt-free lithium iron phosphate technology is considered the safest and most durable on the market.Intelligent battery management (BMS): The integrated BMS permanently monitors and protects the storage unit for safe and optimised operation.High compatibility: Perfectly matched to the low-voltage hybrid inverters from Deye and other compatible systems.Large capacity for maximum independenceWith its high capacity of 10.64 kWh, the Deye RW-F10.6 storage system allows a large part of the solar power generated during the day to be stored and used in the evening and at night. This significantly increases your self-consumption and reduces your dependence on the public electricity grid and rising energy prices. The capacity is ideal for a typical single-family house, even when using appliances such as a heat pump or an electric car.Maximum safety and durability with LiFePO4The use of lithium iron phosphate cells (LiFePO4) sets the highest safety standard in storage technology. These cells are thermally extremely stable, intrinsically safe, and do not require the use of cobalt. They are notable for their exceptionally high cycle life of over 6000 charge and discharge cycles, enabling a very long service life of over 15 years, making the system a sustainable and economical solution.Intelligent control and easy installationAt the heart of the system is the intelligent battery management system (BMS). It reliably protects the storage unit against overcharging, deep discharge, overheating and short-circuiting. It also ensures active cell balancing, which maximises efficiency and service life. As a self-contained unit, the storage block is securely mounted using the supplied wall bracket and connected directly to the inverter, allowing for a clean, quick, and professional installation. Properties  ModelDeye RW-F10.6 ApplicationLow-voltage storage system TechnologyLithium iron phosphate (LiFePO4) Nominal voltage (V)51.2 Energy (kWh)10.64 Usable energy (kWh)9.57 Max. charge/discharge current (A)100 Cycle life≥ 6000 (at 90% DOD) Dimensions (W x D x H in mm)560 x 340 x 780 Weight (kg)approx. 104  FAQs about the Deye RW-F10.6 storage systemFor which household is a storage system with approx. 10.6 kWh suitable?A storage unit of this size is ideal for detached houses with an annual electricity consumption of approx. 4,000 to 8,000 kWh. It provides enough capacity to store the surplus generated during the day by a typical 8-13 kWp PV system and to supply the household with its own solar power overnight as well as on cloudy days.Why is LiFePO4 the safest lithium technology?LiFePO4 cells have a very stable chemical structure. They are not susceptible to thermal runaway, even in the event of mechanical damage or overcharging. This makes them the safest choice for use in residential buildings.What is the advantage of wall mounting?Wall mounting allows for a very space-saving installation in utility rooms, garages, or basements without taking up valuable floor space. This ensures an organised appearance and protects the storage system against ground moisture or dirt.Which inverters is this system compatible with?The Deye RW-F10.6 system is perfectly matched to the low-voltage hybrid inverters from Deye. Communication between the storage BMS and the inverter ensures perfectly coordinated and efficient operation. Compatibility with inverters from other manufacturers should be checked in advance.  Scope of delivery Deye RW-F10.6 lithium iron phosphate battery (10.64 kWh): Module typeThis is a single, wall-mounted low-voltage battery storage unit. A separate, compatible hybrid inverter is required.1 x Deye RW-F10.6 battery module (10.64 kWh)The central storage unit with 10.64 kWh (208 Ah) in a single housing, including an integrated battery management system (BMS).1 x wall bracket (Wall Mount Bracket)A sturdy metal bracket for securely mounting the storage unit to a suitable wall.1 x set of battery connection cables (plus & minus)A pair of pre-assembled high-performance cables (red and black) for connecting the storage unit to the inverter.1 x communication cable (CAN/RS485)A data cable for communication between the battery BMS and the inverter.1 x grounding cableA protective conductor cable for proper grounding of the metal casing.1 x set of mounting materialsUsually includes heavy-duty screws and wall plugs for mounting the wall bracket.1 x operating and installation manualA printed manual with all safety-related instructions, installation steps, and configuration details.