Deye BOS-G 60 PRO high-voltage storage set 61.44 kWh

The Deye SUN-50K-SG01HP3-EU-BM4 is a high-performance hybrid inverter for commercial solar installations with high energy requirements. With a rated output of 50 kW, four MPPT inputs and support for high-voltage batteries, it offers maximum efficiency, flexibility and safety, making it ideal for large PV projects, industrial applications and off-grid power supply systems.Highlights at a glanceHigh-performing: 50 kW rated power and 55 kW maximum output Four MPPT inputs with 8 strings for optimum energy yield Parallel connection of up to 10 devices possible 100% unbalanced output usable per phase Two high-voltage battery inputs (up to 800 V) with 2× 50 A charging/discharging currentEfficient energy conversion for large-scale plantsWith a maximum DC input power of 65,000 W, four MPPT trackers and an efficiency of up to 97.6%, the Deye SUN-50K-SG01HP3-EU-BM4 is ideal for large-scale photovoltaic systems. The MPPT efficiency of 99.9% ensures optimum power output even in the event of partial shading or heterogeneous module arrays.Flexibility and scalabilityThis inverter can be used in systems with up to 10 units connected in parallel, making it particularly suitable for large-scale modular projects. Thanks to two battery inputs with high-voltage support (160–800 V) and a charge/discharge current of 50 A each, it can be flexibly combined with high-performance storage systems. The six programmable charge/discharge time slots offer intelligent energy management for self-consumption and grid relief.Reliability and protectionWith IP65 protection and comprehensive safety features such as reverse polarity protection, residual current monitoring and surge protection (DC Type II / AC Type III), the inverter is ideally equipped for demanding operating conditions. Intelligent cooling ensures quiet operation (< 65 dB) even at high power output.Who is the Deye SUN-50K-SG01HP3-EU-BM4 suitable for?This inverter is ideal for: Commercial enterprises and industrial facilities with very high energy consumption Large-scale projects with multiple battery storage units and module arrays Installers looking to implement future-proof high-voltage systems Off-grid installations with a diesel generator connection Grid-connected storage solutions with intelligent load management  ModelDEYE SUN 50K-SG01 HP3-EU-BM4 Battery input data Battery typeLi-lon Battery voltage range (V)160~800 Max. charging current (A)50+50 Max. discharge current (A)50+50 Number of battery inputs2 Charging strategy for Li-ion batterySelf-configuration for BMS Input data for the PV string Max. DC input power (W)65000 Nominal PV input voltage (V)1000 Starting voltage (V)180 MPP voltage range (V)150-850 Rated DC input voltage (V)600 PV input current (A)36 + 36 + 36 + 36 Max. PV short-circuit current (A)55 + 55 + 55 + 55 Number of MPPT4 Strings per MPPT2 + 2 + 2 + 2 AC output data AC rated power and UPS power (W)50000 Max. AC output power (W)55000 AC rated output current (A)75,8 / 72,5 Max. AC output current (A)83,4 / 79,8 Max. continuous AC current (A)200 Peak power (without mains connection)1.5 times the rated power, 10 S Generator input/Smart load / AC coupling current (A)75,8 / 200 / 75,8 Output power factor0.8 leading to 0.8 trailing Output frequency and voltage50/60Hz; 3L/N/PE 220/380, 230/400Vac Mains typeThree-phase Total harmonic distortion (THD)< 3% (rated power) DC power supply<0,5% ln Efficiency Max. efficiency97,60% Euro efficiency97.00% MPPT efficiency99,90% Protection FusesAnti-islanding protection, reverse polarity protection at the PV string input, insulation resistance detection, residual current monitoring unit, output overcurrent protection, output short-circuit protection, output overvoltage protection Surge categoryDC Type II/AC Type III Certifications and standards Network approvalsVDE4105 IEC61727/62116 VDE0126 AS4777.2 CEI 0 21 EN50549-1 G98 G99 C10-11 UNE217002 NBR16149/NBR16150 Safety EMC / StandardIEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 General data Operating temperature range (℃)-45~60°C, >45° C performance reduction CoolingIntelligent cooling Noise (dB)<65 dB Communication with BMSRS485; CAN Weight (kg)80 Size (mm)527B×894H×294T (excluding connectors and brackets) Degree of protectionIP65 Installation styleWall mount Warranty10 years  FAQs on the Deye Sun 50K Hybrid InverterDo I need external NA protection for systems rated at 50 kW or above?No. The inverter has an integrated anti-islanding circuit and complies with all relevant standards such as VDE-AR-N 4105, EN 50549 and G99. Additional NA protection is therefore not required.Which high-voltage batteries are approved?Officially compatible models include the BYD HVS/HVM, Pylontech Force H1/H2, Dyness Tower and the Deye GB-L series. Communication takes place via CAN or RS485, depending on the model. The correct setup number is entered directly in the menu ‘Battery → Lithium → Setup Number’ or set via DIP switches. According to the manufacturer, other storage solutions such as BOS-G are already pre-configured. It is recommended to check the model against the compatibility list, as changes to the protocols can occur from time to time.How many kWp can I connect without clipping?According to the datasheet, the maximum DC input power is 65,000 W. In practice, a generator size of 60 to 65 kWp is considered optimal. Only above this limit can minor clipping losses occur on a few high-load days, which remain below two per cent over the course of the year. However, it is recommended to stay below 65 kW. The starting voltage of the solar modules is the decisive factor here. Can I connect several 50 kW units in parallel?Yes. Up to ten inverters can be operated in parallel, both grid-connected and off-grid. One unit acts as the master, including the CT sensor connection, whilst the remaining units automatically follow as part of the array.Do I need special ventilation?Active air conditioning is not required. The inverter operates with intelligent air cooling and is designed for ambient temperatures up to 60 °C. The maximum noise level is 65 dB(A) under full load; in standby mode, the unit remains virtually silent. Good air circulation is essential, for example in a ventilated plant room or at a sheltered outdoor location. The fan inlets and outlets must remain unobstructed; otherwise, charging problems may occur.  Scope of delivery: Deye SUN-50K-SG01HP3-EU-BM4 (50 kW HV hybrid inverter) 1 x Deye SUN-50K-SG01HP3-EU-BM4 inverterAn extremely powerful three-phase high-voltage hybrid inverter with 50 kW output, an integrated LCD touchscreen and four MPPT trackers for large commercial photovoltaic systems.1 x wall mount bracketA reinforced metal mounting rail for securely fixing the heavy industrial equipment to a load-bearing wall or mounting frame.1 x Wi-Fi stick (data logger)A plug-in communication module for connecting to the internet for remote monitoring via the Deye Cloud or Solarman app.3 x current transformers (CT)External folding current transformers for measuring energy flows at the building connection, necessary for zero-point feed-in and optimising self-consumption at high load currents.1 x set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the numerous PV strings to the MPPT inputs of the inverter.1 x set of battery connection plugs (high voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x communication cable (BMS)A pre-assembled RJ45 data cable for connecting the inverter to the battery management system.1 x mounting kit (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for the professional installation of the solid wall bracket.1 x User ManualA printed manual containing detailed installation instructions, circuit diagrams and safety instructions.

The SOLR6100 solar cable (100 metres, 6mm²) in red is the professional solution for photovoltaic installations where maximum efficiency and minimum resistance are paramount. With a length of 100 metres per roll and a reinforced cross-section of 6mm², this cable is ideal for large rooftop installations, ground-mounted projects, or systems with high current ratings. The red marking allows standard-compliant identification of the positive pole (+) and ensures clear cabling.Certified according to the international standard IEC 62930, this cable provides the highest safety for modern PV systems with voltages up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section greatly reduces electrical resistance and ensures higher yield compared to standard cables.Certified safety: Conforms to IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.High coverage: 100 metres in one piece allow for individual cuts for custom string connections without unnecessary junctions.Extremely durable: High quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a service life of over 25 years.Corrosion-protected conductor: Fine stranded, tinned copper provides consistently optimal conductivity and protection against oxidation in humid environments.Wide temperature range: Safe operation under extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLR6100 is the first choice for demanding PV projects:Large rooftop systems & PV parksEfficient string cabling and connecting distant module fields to the central inverter.High-performance balcony systemsIdeal for systems with modern modules (500Wp+), to transport high currents without loss.Battery storage & off-grid systemsPerfect for 24V or 48V systems where minimal voltage drops are crucial for charging efficiency.Installation & safety instructionsProfessional connectionUse only MC4 connectors explicitly approved for 6mm² cable with this cross-section and a high-quality crimping tool.Mechanical protectionWhen routing on the roof or through walls, use corrugated conduits or cable ducting to protect the insulation from mechanical abrasion and rodent damage.Parallel cable routingRun positive (red) and negative (black) cables as parallel and close as possible together, to minimise electromagnetic interference (induction loops). Features Model / SKU**SOLR6100** Conductor cross-section**6.0 mm²** Form of supply**100 metre roll** ColourRed (positive pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV & ozone resistant  FAQs on the red solar cable 100m 6mm²Why should I choose 6mm² instead of 4mm²?For higher yield and future-proofing. Especially with cable lengths over 15–20 metres or when using modules with high current (Isc over 13A), the voltage drop with 6mm² is noticeably lower. This means that more energy reaches the inverter and the cable remains cooler under high load.Can the cable be laid directly in the ground?Only in a protective conduit. Although the insulation is very robust, the cable is not designed for direct burial without protection. In suitable cable protection conduit, however, laying in the ground is no problem.Is the cable resistant to chemicals?Yes. The XLPO insulation is resistant to acids, alkalis, and ammonia. This makes it especially suitable for installations in agriculture (barns) or in areas affected by industrial pollution.

The solar cable SOLS6100 (100 metres, 6mm²) in black is the professional solution for photovoltaic installations where maximum efficiency and minimal resistance are paramount. With a length of 100 metres on a reel and a reinforced cross-section of 6mm², this cable is excellent for large roof systems, open-area projects or systems with high currents. The black identification enables standard-compliant identification of the negative pole (-) and ensures clearly arranged cabling.Certified in accordance with the international standard IEC 62930, this cable offers maximum safety for modern PV systems with voltages of up to 1500V DC. The larger cross-section minimises voltage losses even over long distances and is ideal for high-performance module generations delivering high currents.Highlights at a glanceMaximum efficiency: The 6mm² cross-section significantly reduces the electrical resistance and provides more yield compared to standard cables.Certified safety: Complies with IEC 62930 (H1Z2Z2-K) standard for use in photovoltaic systems up to 1500V DC.Long range: 100 metres in one piece enable custom cuts for tailor-made string connections without unnecessary separation points.Extremely resistant: The high-quality XLPO double insulation is UV-resistant, ozone-resistant and flame-retardant for a lifespan of more than 25 years.Corrosion-protected conductor: Fine-stranded, tinned copper offers permanently optimum conductivity and protects against oxidation in a damp environment.Wide temperature range: Safe operation in extreme weather conditions from -40°C to +90°C (short-term peaks up to +120°C).Areas of applicationThe SOLS6100 is the number one choice for demanding PV projects:Large roof systems & PV parksEfficient string cabling and connection of distant module fields to the central inverter.High-performance balcony power plantsIdeal for systems with modern modules (500Wp+), to ensure the loss-free transport of high currents.Battery storage & stand-alone systemsPerfect for 24V or 48V systems where low voltage drops are crucial for charging efficiency.Assembly & safety instructionsProfessional connectionsFor this cross-section, use only MC4 connectors that are explicitly approved for 6mm² cable, and use high-quality crimping pliers.Mechanical protectionWhen laying on the roof or through walls, use corrugated ducts or cable ducts to protect the insulation from mechanical abrasion and rodent bites.Parallel cable routingRoute the black negative cable as parallel and close as possible to the red positive cable to minimise electromagnetic interference fields (induction loops). Features Model / SKU**SOLS6100** Conductor cross-section**6.0 mm²** Delivery form**100 metre reel** ColourBlack (negative pole) Rated voltageDC: 1.5 kV / Max. 1.8 kV Conductor materialCopper, tinned (Class 5) Temperature range-40°C to +120°C (on the conductor) Standardisation**IEC 62930 / EN 50618** Special featureHalogen-free, UV- & ozone-resistant  FAQs about solar cable black 100m 6mm²Why should I choose 6mm² instead of 4mm²?For more yield and future-proofing.Especially for cable lengths above 15–20 metres or when using modules with high current (Isc above 13A), voltage drop is noticeably lower with 6mm². This means more energy reaches the inverter and the cable stays cooler under high load.Can the cable be laid directly in the ground?Only in protective conduit.Although the insulation is very robust, the cable is not designed for direct burial without protection. Installation in a suitable cable conduit in the ground, however, is no problem.Is the cable resistant to chemicals?Yes.The XLPO insulation is resistant to acids, alkalis and ammonia. This makes it particularly suitable for agricultural (stables) or industrially impacted areas.

The Deye SUN-30K-SG02HP3-EU-AM3 is one of the most powerful three-phase high-voltage hybrid inverters for commercial and demanding domestic applications. With a rated output of 30 kW it serves as a central energy hub that intelligently links photovoltaics, battery storage and the public grid. It is specifically designed to handle large loads whilst ensuring maximum independence through state-of-the-art storage technology.Thanks to the AM3 platform this model supports extremely high PV input currents, ensuring compatibility with the latest high-performance solar modules (bifacial or large-format cells). The high-voltage battery system enables outstanding efficiency in energy conversion, making the system the ideal choice for sector coupling (PV, heating, mobility).Highlights at a glanceImpressive 30 kW output power: Sufficient capacity for commercial premises, agricultural use or large apartment blocks with high energy requirements.High-voltage battery support: Operates within a voltage range of 160 V to 800 V, which increases efficiency and reduces installation costs through smaller cable cross-sections.3 MPPT trackers: Enables flexible configuration of up to three different roof areas or orientations to optimise yield throughout the day.High-current PV input: The AM3 series is optimised for modern PV modules with high input currents (up to 36 A per MPPT).Genuine 3-phase emergency power: Provides a complete backup power supply for the entire building in the event of a mains failure, with 100 % unbalanced load capability.Smart Load & Generator Port: A multifunctional connection for the targeted control of high-power consumers (e.g. air conditioning systems) or for integrating an external generator.Robust IP65 housing: Dust-tight and splash-proof for reliable indoor and outdoor installation.Areas of applicationCommercial & IndustryPeak shaving and safeguarding critical infrastructure during power cuts.Agricultural businessesPowering energy-intensive equipment such as milking machines, fans or cooling systems through large-scale use of PV.Neighbourhood solutionsCentral inverter for tenant electricity models in combination with heat pump cascades and electric vehicle charging infrastructure.Installation & safety instructionsSolid constructionDue to the weight of 80 kg, installation must be carried out on a load-bearing wall by at least two qualified technicians. Adequate ventilation is essential for active cooling.Battery systemThe cell is optimized for high-voltage storage racks (e.g. Deye BOS-G series). Correct communication between the BMS and the inverter via CAN/RS485 is essential for safe operation.Mains connectionConnection to the public electricity grid and commissioning must be carried out by a certified electrician to ensure compliance with local regulations (e.g. VDE-AR-N 4105). Features ModelDeye SUN-30K-SG02HP3-EU-AM3 Rated output power30 kW (30,000 W) Phases3-phase (400V / 230V) Battery typeHigh-voltage (HV) Li-Ion Battery voltage range160 V – 800 V Number of MPP trackers3 MPPT Max. efficiency97.60 % Protection classIP65 (weatherproof) Special featureSupports **parallel connection** of up to 10 units  FAQs about the Deye SUN-30K-SG02HP3-EU-AM3Can the inverter be connected in parallel?Yes, up to 10 devices. This enables the implementation of commercial storage solutions in the megawatt-hour range, with both output and storage capacity scalable on a modular basis.Does the device support zero export?Yes, precisely configurable. Using the included Smart Meter, the inverter can be controlled so that no energy is fed into the public grid (zero-export function). The manufacturer should be contacted for the configuration. It is also necessary to coordinate this with the grid operator.How is the system monitored?Via Solarman Cloud. A Wi-Fi or LAN logger is included as standard and transmits all performance data to the cloud in real time. Evaluation is conveniently carried out via app or web browser. Scope of delivery: Deye SUN-30K-SG02HP3-EU-AM3 (30 kW HV hybrid inverter) 1 x Deye SUN-30K-SG02HP3-EU-AM3 inverterA powerful three-phase high-voltage hybrid inverter with 30 kW output, integrated LCD colour touchscreen and three MPPT trackers for large-scale PV systems.1 x Wall mount bracketA reinforced metal mounting rail for securely fastening the heavy industrial unit to a load-bearing wall structure.1 x Wi-Fi stick (data logger)A pluggable communication module for internet connection for remote monitoring via Deye Cloud or the Solarman app.3 x Current transformers (CT - Current Transformer)External clamp-on current transformers for precise measurement of energy flows at the grid connection point, necessary for zero export and self-consumption optimisation.1 x Set of PV connectors (MC4-compatible)The required pairs of DC connectors (positive and negative) for connecting the various PV strings to the inverter.1 x Set of battery connection plugs (high-voltage)Special high-voltage connectors for the safe electrical connection of a compatible HV battery storage system.1 x Communication cable (BMS)A pre-assembled RJ45 data cable for communication between the inverter and the battery management system.1 x Mounting set (screws and wall plugs)A set of stainless steel screws and heavy-duty wall plugs for professional installation of the wall bracket.1 x User manualA printed manual with detailed installation instructions, circuit diagrams and safety information.